Marine Dock Hardware

There are certain unique cast products that can be used in the raw casting state for their intended purpose without any further processing.  We are tooled to produce parts in four such product lines. They are Marine Dock Hardware including cast aluminum dock cleats, High Chrome Iron Sleeves, Cast Boat Parts, and Cast Brass Hammers.

 

Standard Dock Cleats – Aluminum Alloy 356

Part #SizeApprox. LengthApprox. HeightCast Bolt Hole Size
6-WC6 inch6.01.251/4
8-WC8 inch8.02.003/8
10-WC10 inch10.02.503/8
12-WC12 inch12.03.003/8

 

“S” Style Dock Cleats – Aluminum Alloy 356 or Almag 35

Part #SizeApprox. LengthApprox. HeightCast Bolt Hole Size
S-1010 inch9.253.001/2
S-1212 inch11.003.001/2
S-1515 inch14.004.001/2

 

“Euro” Style Dock Cleat, Aluminum Alloy 356 or Almag 35 – Bronze Alloys Navy M or Aluminum Bronze

Part #SizeApprox. LengthApprox. HeightCast Bolt Hole Size
E-1212 inch12.03.251/2

 

“Classic” Style Dock Cleat – Aluminum Alloy 356

Part #SizeApprox. LengthApprox. HeightCast Bolt Hole Size
C-1210 inch10.203.251/2

 

Cord/Hose Holder – Aluminum Alloy 35

Part #SizeApprox. LengthApprox. HeightCast Bolt Hole Size
SHH-150 feet---
LHH-2100 feet---

 

Line Support Aluminum Alloy Almag 35

Part #SizeApprox. LengthApprox. HeightCast Bolt Hole Size
LSPC-1----

High Chrome Iron Sleeves

There are certain unique cast products that can be used in the raw casting state for their intended purpose without any further processing.  We are tooled to produce parts in four such product lines. They are Marine Dock Hardware, High Chrome Iron Sleeves, Cast Boat Parts, and Brass Hammers.

Our Cage Crusher Sleeves come in lengths of 9.25, 12.25, 14.25, and 16.87 inches. All have a 3.50 inch OD and a 1.56 inch ID. The ends can be either flat or flared. The high chrome material is field tested to offer good wear characteristics. We can also supply the mounting bolt hardware for the Sleeves. The primary application has been in limestone quarries but other applications should be equally successful. We can also supply other sleeve sizes upon request.

Crusher Sleeves – 4 Sizes

Application: Heavy Equipment, 18 to 24 pounds, Alloy High Chrome Iron, Spot face ends for flatness

Crusher Cage Assembly

Application: Heavy Equipment

Cast Boat Parts

There are certain unique cast products that can be used in the raw casting state for their intended purpose without any further processing. We are tooled to produce parts in four such product lines. They are Marine Dock Hardware, High Chrome Iron Sleeves, Cast Boat Parts, and Brass Hammers.

Over the years, we have worked with nearly 50 manufacturers of aluminum fishing boats, pontoon boats, houseboats, and yachts. When a manufacturer needs a part that is not readily available in a catalog, it is necessary to create a custom part for their specific application. We have produced Transom Corner castings, Transom Handle castings, Bow Plate castings, Support Bracket castings, Step Plate castings, and many other custom pieces.

Canoe Bow Plate

Alloy 535

Pontoon Boat Rub Rail Corner

Alloy 535

Fishing Boat Transom Corner With Handle

Alloy 319

Brass Hammer

There are certain unique cast products that can be used in the raw casting state for their intended purpose without any further processing. We are tooled to produce parts in four such product lines. They are Marine Dock Hardware, High Chrome Iron Sleeves, Cast Boat Parts, and Brass Hammers.

Working around combustible gases requires specialized tools that avoid sparking. One such tool that is most helpful is a brass hammer. Most brass hammers consist of a brass head with the handle section being wood or fiberglass. Our brass hammer is totally brass and cast as a single piece. Our hammer has a total weight of approximately 3.8 pounds. The dimensions are as follows.
Length overall – 11.0 Inches
Head length – 3.25 Inches
Head height – 1.5 Inches
We can also manufacture other brass tools for use in the same environment. Please contact us for further information.

Brass Hammer

Application: Heavy Equipment, 3.6 pounds, Alloy C865